Canon Color imageCLASS MF9280Cdn - Manual (Page 418)

Scanning
8-7
Basic Scanning Operations
You can specify the following settings:
<Color/File Format Settings>: Specifies the
color type of originals and the file format for
sending. (See “Scan,” in the e-Manual.)
<Resolution Settings>: Adjusts the resolution
of originals. (See “Scan,” in the e-Manual.)
<Density/Background Rem. Set.>: Adjusts the
density and the background color of originals.
(See “Scan,” in the e-Manual.)
<Original Image Quality Settings>: Adjusts the
image quality of originals. (See “Scan,” in the
e-Manual.)
<2-Sided Orig. Orientation Set.>: Scans
two-sided originals for sending. (See “Scan,” in
the e-Manual.)
<Delayed TX Settings>: Specifies the
transmission time. (See “Scan,” in the
e-Manual.)
<Send Document Name Settings>: Sets the
name of the document for sending. (See
“Scan,” in the e-Manual.)
<Subject/Message Settings>: Sets the
message body text. (See “Scan,” in the
e-Manual.)
<Register Favorites>: Stores frequently used
send settings for future use. (See “Scan,” in the
e-Manual.)
7
Press (Start).
Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
To cancel scanning, press the left Any key to
select <Cancel> or press (Stop).
–
–
–
–
–
–
–
–
–
–
–
8
Use [ ▼], [▲] or (Scroll Wheel) to select
the original size, then press [OK].
9
Press (Start).
Scanning starts.
To cancel scanning, press the left Any key to
select <Cancel> or press (Stop).
10
Follow the instructions on the display,
then press (Start) once for each
original.
–
–