Actiontec electronic GT701R - Manual (Page 101)

96
Actiontec USB/Ethernet DSL Modem User Manual
97
Appendix G Setting up a Non-Windows System
3. The Network window appears. Select Built-In Ethernet from the “Show”
drop-down list.
4. Select TCP/IP and, from the “Configure” drop-down list, select Using DHCP .
5. Click Apply Now and close the “System Preferences” application. The TCP/
IP settings are configured.
Next, go to “Connecting to the ISP ,” below.
Connecting to the ISP
To connect the Modem to the ISP :
1. Open a Web browser. In the “Address” text box type:
http://192.168.0.1
then press Enter on the keyboard.