Actiontec electronic GT701R User Manual
Page 44
38
Actiontec USB/Ethernet DSL Modem User Manual
39
Chapter 6 Configuring Advanced Settings
RFC 1483 via Static IP
Select this option if the
ISP
service is configured to use
RFC
1483 using a static
IP
address, which causes the
IP
address and routing information to terminate at
the Modem, as opposed to the
IP
address and routing information being bridged
to terminate at the computer. This allows the use of the router capabilities for
the Local Area Network (
LAN
). Enter the
IP
, subnet mask, and default gateway
addresses provided by the
ISP
in the appropriate text boxes,.
☞
Note: Contact the
ISP
if unsure of the proper configuration.
Encapsulation
If the Modem is configured to obtain an
IP
address through
DHCP
or to specify a
static
IP
address, select the appropriate encapsulation option used by the ISP (
RFC
1483
Bridged or
RFC
1483
Routed).
☞
Note: Contact the
ISP
if unsure of the proper configuration.
For more information about setting up the Modem to use a static
IP
address, see
chapter 4, “Setting Up Static
IP
Addresses,” on page 15.