Actiontec electronic GT701R - Manual (Page 28)

22
Actiontec USB/Ethernet DSL Modem User Manual
23
Chapter 4 Setting up Static IP Addresses
5. The “ WAN IP Address” screen appears. Scroll down to “Select the IP type,” click
on the circle next to “Block of Static IP Addresses.”
6. Enter the Gateway and Subnet Mask addresses obtained from the ISP work-
sheet in the appropriate text boxes.
7a. If provided with DNS settings on the ISP worksheet, scroll down to “Select the
DNS type.” Click the circle next to “Static DNS Addresses” and enter the DNS
addresses in the appropriate text boxes. Go to step 8.
7b. If no DNS settings were provided on the ISP worksheet, scroll down to “Select
the DNS type.” Click the circle next to “Dynamic DNS Address.” Go to step 8.
8. Click Apply.