Actiontec electronic GT701R - Manual (Page 18)

12
Actiontec USB/Ethernet DSL Modem User Manual
13
Chapter 3 Performing a Quick Setup
5. In the next screen, select the type of connection provided by the ISP by click-
ing in the radio button next to “ PPPoA ” or “ PPPoE .” If unsure about the selec-
tion, check the information provided by the ISP .
6. Enter the user name and password provided by the ISP in the appropriate text
boxes, then click in the radio button next to “Dynamic IP - DHCP .”
Click Apply .
☞
Note: If setting up the Modem with a single static IP address or
a block of static IP addresses, see chapter 4, “Setting up Static IP
Addresses,” on page 15 to configure the Modem.