Actiontec electronic GT701R - Manual (Page 81)

76
Actiontec USB/Ethernet DSL Modem User Manual
9. Enter the following address in the “ IP Address” text box:
192.168.0.2
Enter the periods in the address by pressing the space bar on the keyboard.
10. Enter the following address in the “Subnet mask” text box:
255.255.255.0
Enter the periods in the address by pressing the space bar on the keyboard.
11. Click OK. The Internet Protocol ( TCP/IP ) Properties window disappears.
12 In the Local Area Connection Properties window, click Close . The Local Area
Connection Properties window disappears.
13. Click Close in the Local Area Connection Status window. The window
disappears.
14. Close the Network and Dial-up Connections window by clicking on the “x”
button at the upper right corner of the window.
The computer is now set up with a static IP address, allowing the user to access the
Modem’s GUI .