Actiontec electronic GT701R - Manual (Page 42)

36
Actiontec USB/Ethernet DSL Modem User Manual
37
Chapter 6 Configuring Advanced Settings
The “ WAN IP Address” screen appears.
WAN IP Address allows manual set up of the IP address of the Modem. There are
five ways to do this: PPPoA, PPPoE, RFC 1483 Transparent Bridging, RFC 1483
via
DHCP , and RFC 1483 via Static IP .
☞
Note: Some DSL providers use PPP o E/PPPoA to establish com-
munication with an end user. If unsure about which connection
is present, check with the
ISP before continuing.