Wan ip address – Actiontec electronic GT701R User Manual
Page 41
36
Actiontec USB/Ethernet DSL Modem User Manual
37
Chapter 6 Configuring Advanced Settings
The “
LAN IP
Address” screen appears.
The values in the “
LAN IP
Address” and “Netmask” text boxes are the
IP
address
and subnet mask address of the Modem as seen on the network. These values can
be modified for your
LAN
network, but Actiontec recommends keeping the default
factory settings (
IP
address - 192.168.0.1; subnet mask - 255.255.255.0).
☞
Note: If the Modem’s
LAN IP
Address is modified, verify the
DHCP
Server range is within the same subnet. For more infor-
mation, see “
DHCP
Server Configuration.”
After changing settings, click Apply & Reboot reboot the Modem and make all
changes permanent.
WAN IP Address
Selecting
WAN IP
Address in the Advanced Setup tab generates a “Warning” screen.
After reading the on-screen information, click Yes.