HP Integrity NonStop J-Series - Manual (Page 115)

CREATING AND RUNNING A MULTIFILE APPLICATION
Establishing a PATHWAY System and Executing the Application
When you use this form of the GENERATE command, ENABLE generates
all the applications that exist in the object table.
Submitting the Command File to ENABLE
If you have entered your ENABLE commands on a command file, you
complete the tasks involved in generating an application by
submitting the command file to ENABLE. To submit the command
file, you use the following form of the ENABLE run command:
ENABLE/ IN <command-file> /
<command-file> is your edit-type file of ENABLE commands.
You enter this command in response to the command interpreter
prompt (:), for example:
:ENABLE/IN enabcmds/
ESTABLISHING A PATHWAY SYSTEM AND EXECUTING THE APPLICATION
An ENABLE application executes within a PATHWAY system. If you
supply a value for the PATHCOMFILE attribute when you generate an
application, ENABLE writes PATHCOM commands to the named EDIT
file. You can use these commands to establish a PATHWAY system
to execute your application. Figure 5-16 shows the PATHCOM
commands written by ENABLE for the sample "employee-detail"
application.
5-31