HP Integrity NonStop J-Series - Manual (Page 295)

ENABLE Messages
ENABLE Error and Warning Messages
Messages may also be received from the GUARDIAN operating system.
Refer to the GUARDIAN Operating System Programmer's Guide for
information about these messages.
Table B-1 lists the messages that ENABLE might issue in response
to commands or during application generation.
Table B-1. ENABLE Error and Warning Messages
(Continued next page)
-----------------------------------------------------------------
| |
| Message Meaning |
|_______________________________________________________________|
| |
| A flag in the range 0 to 99 The value supplied for the |
| must be specified <flag-num> parameter of the |
| FLAG attribute is invalid. |
| |
| All fields have been No fields exist in the box. |
| excluded from this box You specified all fields in |
| the record description when |
| you supplied a value for the |
| EXCLUDE attribute. Change |
| the value of the EXCLUDE |
| attribute. |
| |
| All key fields have been No primary or alternate key |
| excluded from this box field exists in a box that |
| represents a key-sequenced |
| file. Either you supplied |
| the EXCLUDE attribute with a |
| value that eliminated all key |
| fields, or you did not |
| specify a key field when you |
| supplied a value for the |
| INCLUDE attribute. If the |
| file is entry-sequenced, |
| relative, or unstructured, |
| you might have excluded both |
| the courtesy key and all |
| alternate keys. If you |
| supplied a value for INCLUDE, |
| you must explicitly include |
| the courtesy key. Use the |
| SHOW command to check the |
| value of both the INCLUDE and |
| EXCLUDE attributes. |
| |
-----------------------------------------------------------------
B-2