HP Integrity NonStop J-Series - Manual (Page 180)

USING AN ENABLE APPLICATION
INSERT BOX
2. Enter screen values in the nested box.
3. Press shifted F10.
NOTE
Do not enter values in a nested box unless you have
previously requested a read or insert operation for the
containing box. If you enter values in the nested box
before you request an operation for the containing box, the
application will remove the values from the nested box when
it performs the operation on the containing box. If an
application automatically reads a record for a nested box
whenever you request an operation for a containing box, the
application will replace the values in the nested box with
values read from the data base.
Figure 8-10 illustrates an INSERT BOX operation for an
application that displays several boxes.
8-27