HP Integrity NonStop J-Series - Manual (Page 189)

USING AN ENABLE APPLICATION
Operator Display and Error Messages
OPERATOR DISPLAY AND ERROR MESSAGES
The application displays messages on the upper and lower portions
of the screen. For example, when the application is ready for
you to perform an operation, the following message is displayed
on the lower portion of the screen:
Ready for Input
After you perform an initial read operation for a box, one of the
following messages appears on the upper portion of the screen
whenever you are positioned within the box:
Approx Key key-name appears after a READ FIRST, READ NEXT,
and READ APPROXIMATE.
Exact Key key-name appears after a READ EXACT.
Generic Key key-name appears after a READ GENERIC.
Each time you successfully complete an operation, an appropriate
message is displayed on the lower portion of the screen:
• Record deleted OK
• Delete undone OK
• Record inserted OK
• Update undone OK
• Record read OK
• Items inserted: nnn
• Record updated OK
• Items deleted: nnn
• Insert undone OK
• Items updated: nnn
The application displays error messages on the last line of the
screen; the messages persist until you press a function key.
These messages are listed in Appendix B under "Application
Run-Time Messages."
8-36