HP Integrity NonStop J-Series - Manual (Page 306)

ENABLE Messages
ENABLE Error and Warning Messages
Table B-1. ENABLE Error and Warning Messages (Continued)
-----------------------------------------------------------------
| |
| Message Meaning |
|_______________________________________________________________|
| |
| Supply a value for the |
| SERVERCLASS attribute to |
| identify a different copy of |
| the General Server for boxes |
| with different integrity |
| attribute values. |
| |
| Must have READ with UPDATE The UPDATE or DELETE option |
| or DELETE is ON, but READ is OFF. You |
| must supply ON as a value of |
| the READ attribute if either |
| UPDATE or DELETE is ON. |
| |
| Name not found: ENABLE cannot find the named |
| <field-name> field in the record |
| description. |
| |
| Name not sufficiently The named field requires |
| qualified to avoid qualification. Refer to the |
| ambiguity: <field-name> discussion of ENABLE command |
| conventions in the reference |
| manual. |
| |
| No field is left to be The value of the EXCLUDE |
| displayed in box: attribute indicates that all |
| <box-name> fields are to be excluded |
| from the named box or that |
| only the join field is left |
| in the box. At least one |
| field must appear in a box on |
| the terminal screen. |
| |
| No microcode for ENABLE in ENABLE microcode has not been |
| this CPU installed in the CPU. |
| |
| NONSTOP and TMF cannot both Both NONSTOP and TMF are ON. |
| be selected Reset the value of one of |
| these attributes. |
| |
-----------------------------------------------------------------
B-13