HP Integrity NonStop J-Series - Manual (Page 81)

SINGLE-FILE APPLICATIONS
Establishing a PATHWAY System and Executing an Application
-----------------------------------------------------------------
| |
| SET PATHMON BACKUPCPU 1 |
| SET PATHWAY MAXTCPS 10 |
| SET PATHWAY MAXTERMS 10 |
| SET PATHWAY MAXPROGRAMS 10 |
| SET PATHWAY MAXSERVERCLASSES 10 |
| SET PATHWAY MAXSERVERPROCESSES 10 |
| SET PATHWAY MAXSTARTUPS 10 |
| SET PATHWAY MAXPATHCOMS 40 |
| SET PATHWAY MAXASSIGNS 32 |
| SET PATHWAY MAXPARAMS 32 |
| START PATHWAY COLD! |
| |
| SET TCP PROGRAM $SYSTEM.SYSTEM.PATHTCP2 |
| SET TCP CPUS 0:1 |
| SET TCP MAXTERMS 5 |
| SET TCP MAXSERVERCLASSES 001 |
| SET TCP MAXSERVERPROCESSES 001 |
| SET TCP MAXTERMDATA 06464 |
| SET TCP MAXREPLY 02000 |
| SET TCP NONSTOP 0 |
| SET TCP TCLPROG $MYVOL.MYSUB.POBJ |
| ADD TCP ENABLE-TCP |
| |
| SET PROGRAM TCP ENABLE-TCP |
| SET PROGRAM TYPE T16-6520 INITIAL EMPLOYEE-PROG |
| SET PROGRAM TMF OFF |
| ADD PROGRAM EMPLOYEE-PROG |
| |
| RESET SERVER ASSIGN, PARAM |
| |
| SET SERVER PROGRAM $SYSTEM.SYSTEM.ENABLEGS |
| SET SERVER CPUS 0:1 |
| SET SERVER NUMSTATIC 1 |
| SET SERVER (ASSIGN EMPLOYEE,EMPFILE) |
| SET SERVER TMF OFF |
| ADD SERVER ENABLE-SERVER |
| |
-----------------------------------------------------------------
Figure 4-3. PATHCOM Command File for the Sample Employee-Prog
Application
4-8