HP Integrity NonStop J-Series - Manual (Page 286)

Sample Project-Tracking System
Modifying the PATHCOM Command File to Integrate the Applications
-----------------------------------------------------------------
| |
| Menu to project-entry to employee-assign to |
| look-up equals: |
| |
| 359 + 6,018 + 4,674 + 3,840 = 1,4891 |
| |
| Menu to project-info to event-detail equals: |
| |
| 359 + 7,402 + 4,850 = 1,2611 |
| |
| Menu to event-detail equals: |
| |
| 359 + 4,850 = 5,209 |
| |
| Menu to event-revised equals: |
| |
| 359 + 5,160 = 5,519 |
| |
| The number of bytes in the longest path is 14,891. |
| Multiplying this figure by 2 gives the estimated value |
| 29,782 for MAXTERMDATA. |
| |
| (2) You change the INITIAL specification from PROJECT-ENTRY |
| to MENU. |
| |
| (3) You change the program-name entry from PROJECT-ENTRY to |
| MENU. |
| |
| (4) You add the SET SERVER ASSIGN commands necessary for |
| all the applications. You can copy these commands from |
| the PATHCOM command files generated for each |
| application. |
| |
| (5) Optionally, you can add commands to describe a terminal |
| named TERM01 and add a description of this terminal to |
| the PATHWAY system. If you want to execute your |
| applications by entering a PATHCOM RUN PROGRAM command, |
| do not add the TERMINAL commands to your PATHCOM |
| command file. |
| |
| (6) Optionally, you can add commands to describe and add a |
| terminal named TERM02. |
| |
-----------------------------------------------------------------
Figure 12-28. Sample Modified PATHCOM Command File
(Continued)
12-58