HP Integrity NonStop J-Series - Manual (Page 218)

INTEGRATING APPLICATIONS
Modifying a PATHCOM Command File
MODIFYING A PATHCOM COMMAND FILE
To establish a PATHWAY system that integrates several ENABLE
applications, you can modify the PATHCOM command file generated
for any one of them. The PATHCOM command file generated for a
single application contains the PATHWAY commands required to
execute that application. To include the PATHWAY commands that
allow execution of more than one application, select a PATHCOM
command file and modify it using the text editor as follows:
1. Increase the value specified for MAXTERMDATA to include
enough data space for the applications.
2. Change the program name specified for SET PROGRAM TYPE and
ADD PROGRAM to the name of your menu program.
3. Include all the appropriate SET SERVER ASSIGN commands from
the other PATHCOM command files.
4. Optionally, include additional commands that affect the
PATHWAY system, such as commands that define and control
terminals.
Figure 11-4 shows the commands that must be modified in a sample
PATHCOM command file. (The application used to generate this
file is shown in Section 12.)
11-14