HP Integrity NonStop J-Series - Manual (Page 36)

TASK OVERVIEW
Effect of the ENABLE Commands
4. Certain attributes whose starting values are null and for
which you have supplied neither override nor current values--
ENABLE supplies default values to determine the object's
description.
Effect of the ENABLE Commands
Typically, you use the ENABLE commands to perform the following
tasks:
1. Describe a box by supplying values for the box attributes.
2. Name the box and add it to the object table.
3. Repeat steps 1 and 2 until you have described and added every
box to be used by the application.
4. Describe the application by supplying values for the
application attributes.
5. Name the application and add it to the object table.
6. Generate the application.
The following paragraphs describe the action that ENABLE takes
when you perform the preceding tasks to:
• Provide a complete description of a box named "employ-box"
• Add this box to the object table
• Describe an application named "employ-in"
• Add this application to the object table
• Generate "employ-in"
Describing and Adding a Box
The values of the box attributes describe a box. To supply a
value for these attributes, you can use one of the following
commands:
• The SET command--which supplies a current value for the
attribute
2-13