HP Integrity NonStop J-Series - Manual (Page 261)

Sample Project-Tracking System
Event-Detail Application
Figure 12-22 shows the ENABLE commands used to generate the
"events-detail" application. The numbers that appear to the
right of this figure refer to commands of particular interest
that:
1. Limit the application to read-only access to both the
"events" and "employs" files
2. Supply "events" as the value of the RECORD attribute (Note
that this value of the RECORD attribute applies to both the
"event-x" box and the "events-a" box. Although both boxes
represent the events file, each box displays different fields
from the same record in this file.)
3. Indicate that the application is to perform an automatic
read operation for the "events-a" and "employ-assign" boxes
whenever the contents of the "events-x" box changes
4. Request a SCREEN COBOL compilation listing for this
application. You will need information from this listing
when you integrate the application into the project-tracking
system
12-33