HP Integrity NonStop J-Series - Manual (Page 228)

INTEGRATING APPLICATIONS
Integrating the Application
• SET TCP MAXREPLY
This command identifies the maximum number of bytes permitted
in a reply from a server. The value of this parameter must be
equal to or greater than the value of MAXREPLY in the
generated PATHCOM command file.
• SET TCP MAXTERMDATA
This command identifies the number of bytes used for data area
for each terminal. The value of this parameter must be equal
to or greater than the value of MAXTERMDATA in the generated
PATHCOM command file.
• SET TCP MAXSERVERCLASSES
This command identifies the maximum number of server classes
with which the TCP can establish links. If you must add a
server class description for the General Server, the value of
this parameter must be large enough to allow for the existing
server classes and the new description of the General Server
server class.
If the existing system configuration already defines a server
class for the General Server, use the PATHCOM ALTER command to
add appropriate SET SERVER ASSIGN commands for the new
application. When you use the ALTER command, be sure to copy
the SET SERVER ASSIGN commands from the generated PATHCOM
command file.
If the existing configuration does not define a server class
for the General Server, use the PATHCOM SET and ADD commands
to add the appropriate definition.
11-24