HP Integrity NonStop J-Series User Manual
Page 175
USING AN ENABLE APPLICATION
INSERT
-----------------------------------------------------------------
| |
| STEP 1: Enter the values in the fields. |
| |
| Page 1/1 |
| (Stored as 0387) * EMPNUM 387_ |
| + EMPNAME JANE WILSON_________ |
| (Stored as 0600) + DEPT |
| (1st two digits 06) REGNUM 6_ |
| (2nd two digits 00) BRANCHNUM __ |
| (Stored as ANALYST) JOB __ANALYST_ |
| AGE 22 |
| SALARY 1600.00 |
| (If this is a signed VACATION 1_ |
| field, the value is |
| stored as 1--the |
| first position on |
| the display is |
| reserved for the |
| sign; if this is |
| an unsigned field, |
| the value is stored |
| as 01.) |
| |
| STEP 2: Press F10 to insert the record. |
| |
-----------------------------------------------------------------
Figure 8-7. Inserting a Record
Figure 8-7 illustrates the following:
• You do not have to enter a value in each field.
• You can enter characters in any position on the line. The
application will store values entered in numeric fields like
EMPNUM right-justified with leading zeros. The application
will store values entered in alphanumeric fields like JOB
left-justified with trailing blanks.
8-22