HP Officejet 590 All-in-One Printer - Manual (Page 108)

3/27/97 11:20 am Final version given to printer
...............................................................................................................
7-11
HP Company Confidential
7
. Ge
tt
ing
He
lp
Insert connector The fax/phone line con-
nector has been removed.
(This is the connector to
which your phone cords
are attached. It fits into
the back of the HP
OfficeJet.)
The HP OfficeJet can’t
send or receive faxes until
the connector is replaced.
For safety, press the
On/Off button to turn off the HP
OfficeJet before re-installing the
fax/phone line connector.
Re-install the fax/phone line
connector.
For illustrated instructions, refer
to Step 2 in the HP OfficeJet
Series 500 Ready/Setup/Go
guide.
Press the On/Off button to
turn on the HP OfficeJet, then
click the
Reconnect now button
on your computer screen.
Load A-size paper, then
press START. The paper or envelope
you loaded in the paper
supply tray has a nar-
rower width than the
paper size that’s needed
for receiving faxes or
printing.
(A-size is letter-size
paper, 8.5 inches wide by
11 inches high.)
Do either of the following:
• Load A-size paper in the paper
supply tray, or
• If you’re printing on envelopes,
change the paper size (in your
software program’s page setup
settings) to envelopes.
Press the Start button to
clear the message.
Load A4-size paper, then
press START. The paper or envelope
you loaded in the paper
supply tray has a nar-
rower width than the
paper size that’s needed
for receiving faxes or
printing.
(A4-size is European let-
ter-size paper, 210 mm
wide by 297 mm high.)
Do either of the following:
• Load A4-size paper in the
paper supply tray, or
• If you’re printing on envelopes,
change the paper size (in your
software program’s page setup
settings) to envelopes.
Press the Start button to
clear the message.
Load doc to send You’ve specified that you
want to begin sending a
group fax, but there’s no
document loaded in the
document tray. Load the document in the docu-
ment tray that you want to send
as a group fax. Then press the
Start button.
This keypad
message:
Has this meaning:
And this action is
recommended:
1
2
3
1
2
1
2