HP Officejet 590 All-in-One Printer - Manual (Page 54)

3/27/97 11:08 am Final version given to printer
...............................................................................................................
3-8
HP Company Confidential
Receiving Printed Faxes
The HP OfficeJet is factory-set to print received faxes. Before you
receive a fax call, be sure to load one of the supported paper sizes for
receiving faxes, as described below.
Loading the paper supply
Pull the document tray forward all the
way until it snaps into the upright position.
Load up to 150 sheets of 20-lb paper
(about a 1/2-inch-thick stack) into the paper
tray.
The paper should fit behind the stack guides
on the lower part of the tray as shown. Load
sheets with the print side facing you.
Notes:
1) Only plain paper may be used for printing
faxes.
2) Only letter (A or A4)- or legal-size paper
may be used for printing faxes.
3) If you change the paper size in the tray, be
sure to update the paper size setting in the
HP OfficeJet Manager software. Refer to
“Changing the paper size setting” later in
this chapter under “Advanced fax receive
settings” for instructions.
Push the document tray back to its nor-
mal position, resting in front of the paper
tray.
Extend the output tray slowly until it
stops.
Stack
guides
Output
tray
1
2
3
4