HP Officejet 590 All-in-One Printer - Manual (Page 93)

3/27/97 11:17 am Final version given to printer
...............................................................................................................
6-4
HP Company Confidential
• Load a single envelope as
shown, with the address-side fac-
ing toward you and the stamp-
edge down
.
• Change the paper size in the
print settings to the envelope size
you loaded. Refer to “Using the
Paper tab settings” later in this
chapter.
Loading multiple envelopes
Pull the document tray for-
ward and remove any paper from
the paper supply tray.
Pinch and slide the right
paper guide to the envelope
position.
Load the stack of envelopes
(up to 10) with the address-side
facing toward you and the
stamp-edge down
. Align the right
edge of the stack with the right
paper guide.
Pinch and slide the left paper
guide until it touches the left edge
of the envelope stack.
Push the document tray back-
ward until it rests against the
paper tray.
Loading transparencies
• Load transparencies (up to 50)
with the adhesive-strip edge
down and facing away from
you, and the rough side facing
toward you
. The arrows on the
adhesive strip will be on the side
of the transparency that faces
away from you.
Load a single
envelope with
the address
facing you and
the stamp-edge
down.
paper guide
to the envelope
position.
Slide the right
1
2
Load envelopes
with the address
facing you and
the stamp-edge
down.
3
Slide the left
paper guide
to the edge
of the envelope
stack. 4
5
Load the
transparencies
with the rough
side facing
you and the
adhesive-strip
edge down.