HP Officejet 590 All-in-One Printer User Manual

Page 110

Advertising
background image

3/27/97 11:20 am

Final version given to printer

...............................................................................................................

7-13

HP Company Confidential

7

. Ge

tt

ing
He

lp

Off hook...

You pressed the Start
button, and this gives you
a dial tone so that you can
begin real-time dialing to
send a fax.

Begin dialing the fax number to
send a fax using the real-time
dialing method.
For step-by-step, illustrated
instructions, refer to “Dialing in
real time” (under the “Sending
from the keypad” section) in
Chapter 3.

Phone off-hook

You lifted the receiver of
a phone that’s attached
directly to the HP Office-
Jet, and you have a dial
tone.

Begin dialing a phone or fax call
at any time.

Press START to
re-enter date, or
STOP to skip.

While the HP OfficeJet
was disconnected from
your computer, you
entered an invalid date on
the HP OfficeJet’s key-
pad.
The current date will be
entered on the header of
the faxes you send, so
accuracy is important.

Press the

Start

button to enter a

valid date, or re-connect to your
computer.
When you re-connect the HP
OfficeJet to your computer, the
current time and date will be
automatically sent to the HP
OfficeJet. (See note below.)

Press START to set time/
date, or
STOP to skip.

The HP OfficeJet was
disconnected from your
computer and then lost
power, so you are being
prompted to manually
enter the current time and
date.

Note:

The current time

and date will be entered
on the header of the faxes
you send, so accuracy is
important.

Press the

Start

button to begin

entering the current time and
date, or re-connect to your com-
puter.

Note:

When the HP OfficeJet is

connected to your computer
(using the bi-directional parallel
cable that’s included in the box),
you won’t need to set the date
and time; the date and time on
the HP OfficeJet’s message dis-
play are automatically loaded
from your computer. (Refer to
the illustrated connection
instructions in the Ready/Setup/
Go
guide.)

Receive failed

While you were receiving
a fax, a communication
error occurred between
the HP OfficeJet and the
sending fax machine.
Failed transmissions are
most often caused by
“noise” on the telephone
line.

If you know the identity of the
person sending the fax, call and
ask them to resend it.

This keypad

message:

Has this meaning:

And this action is

recommended:

Advertising