HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 16)

Command line 16
Supported actions: delete, help, set, show
Item Description
delete domain Delete the existing Virtual Connect domain configuration.
Deleting the domain removes the entire Virtual Connect domain configuration
and resets it to the original defaults. After the domain has been deleted, you are
logged out and the Virtual Connect Manager resets.
Syntax delete domain [-quiet]
Option
quiet Suppresses user confirmation prompts. This option is useful when scripting delete
domain operations.
Examples
->delete domain
Deletes the Virtual Connect domain configuration and prompts for user
confirmation
->delete domain -quiet
Deletes the Virtual Connect domain quietly without prompting for user
confirmation (primarily used in automated scripting scenarios)
Item Description
set domain Modify general Virtual Connect domain configuration properties, such as the
domain name, domain IP address, and MAC and WWN address pool settings.
Syntax set domain [Name=<NewName>] [DomainIp=<Enabled|Disabled>]
[IpAddress=<IPAddress>] [SubnetMask=<mask>]
[Gateway=<Gateway>] [MacType=<VC-Defined|Factory-Default|
User-Defined>] [MacPool=<1-64>] [MacStart=<address>]
[MacEnd=<address>] [WwnType=<VC-Defined | Factory-Default
| User-Defined>] [WwnPool=<1-64>] [WwnStart=<WWN Address>]
[WwnEnd=<WWN Address>] [SingleDense=true|false]
Properties
Name(optional) The new name of the domain. Valid characters include alphanumeric, "_", and
".". The maximum length of the name is 64 characters.
DomainIP (optional) Enables or disables the Virtual Connect domain IP address. If enabled, then a
valid IP address subnet mask must be configured. If disabled, then DHCP is used
to obtain a valid IP address.
Enabling domain IP address configuration or changing the domain IP address
can cause a temporary loss of connectivity to the Virtual Connect Manager. Use
caution when changing these settings. Valid values include "Enabled" and
"Disabled".
IpAddress
(optional)
A valid IP address to use for the domain IP address configuration. The IP address
must be in the format: xxx.xxx.xxx.xxx, where x is a number between 0 and 9.
Example: 192.168.0.10
SubnetMask
(Required if IP
address specified)
A valid subnet mask for the domain IP address configuration. The subnet mask
must be in the format: xxx.xxx.xxx.xxx, where x is a number between 0 and 9.
Example: 255.255.255.0
Gateway (Required
if IP address
specified)
A valid gateway address for the domain IP address configuration. The gateway
address must be in the format: xxx.xxx.xxx.xxx, where x is a number between 0
and 9. Example: 192.168.0.1