HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem User Manual
Page 77
Configuring the Virtual Connect domain using the CLI 77
>add user bob password=fhkjdhfk privileges=domain,network
•
Modify an existing user
>set user bob fullname="Bob J Smith" enabled=false
•
Remove an existing user
>remove user bob
•
Remove all local users except for the Administrator account
>remove user *
Display local users:
•
Summary display
>show user
•
Detailed display
>show user *
•
Displaying info on a single user
>show user steve
Up to 32 local user accounts can be created.
Each account can be set up to have a combination of up to four access privileges:
•
Domain
o
Define local user accounts, set passwords, define roles
o
Import enclosures
o
Name the VC domain
o
Set the domain IP address
o
Update firmware
o
Administer SSL certificates
o
Delete the VC domain
o
Save configuration to disk
o
Restore the configuration from a backup
•
Networking
o
Configure network default settings
o
Select the MAC address range to be used by the VC domain
o
Create, delete, and edit networks
o
Create, delete, and edit shared uplink sets
•
Server
o
Create, delete, and edit server Virtual Connect profiles
o
Assign and unassign profiles to device bays
o
Select and use available networks
o
Power on and off server blades within the enclosure
•
Storage
o
Select the WWNs to be used by the domain
o
Setup the connections to the external FC Fabrics