HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 45)

Command line 45
Item Description
->remove port-monitor AnalyzerPort=enc0:3:1
Removes the network analyzer from the configuration
->remove port-monitor monitorPort=enc0:1:1
Removes a specific server port from the monitored port list
->remove port-monitor monitorPort=*
Removes all monitored ports
Item Description
set port-monitor Modify an existing port monitor configuration.
Syntax set port-monitor [Enabled=<true|false>]
[AnalyzerPort=<PortID>]
[Speed=<Auto|10MB|100MB|1GB|Disabled>]
[Duplex=<Auto|Half|Full> MonitorPort=<PortID>]
[Direction=<ToServer|FromServer|Both>]
Properties
Enabled (optional) Enables or disables port monitoring. The network analyzer port must be
configured properly before port monitoring can be enabled.
AlayzerPort
(optional)
The uplink port used for monitoring network traffic. The format of the network
analyzer port is: <EnclosureID>:<InterconnectBay>:<PortNumber>.
If the enclosure ID is not specified, the default enclosure is the local enclosure.
Speed (optional) The port speed for the network analyzer port Valid values include: "Auto",
"10Mb", "100Mb", "1Gb", and "Disabled". The default value is "Auto".
Duplex (optional) The port duplex mode of the network analyzer port. Valid values include: "Auto",
"Half", and "Full". The default value is "Auto".
MonitorPort
(required if the
Direction property
is being modified)
The server port to be monitored. The format of the monitored port is:
<EnclosureID>:<DeviceBay>:<PortNumber>.
If the enclosure ID is not specified, the default enclosure is the local enclosure
where the domain resides.
Direction
(optional)
The direction of network traffic on the port being monitored. Valid values include:
"ToServer", "FromServer", and "Both".
Examples
->set port-monitor AnalyzerPort=enc0:3:1 Speed=1Gb
Duplex=half
Modifies network analyzer uplink port properties
->set port-monitor MonitorPort=enc0:1:6 Direction=ToServer
Modifies a monitored server port
->set port-monitor Enabled=true
Enables port monitoring
->set port-monitor Enabled=false
Disables port monitoring
Item Description
show port-monitor Display the Virtual Connect port monitor configuration.
Syntax show port-monitor