HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 64)

Command line 64
Item Description
PortID (optional) The ID of an uplink port. The PortID format is
<EnclosureID>:<Bay>:<PortNumber>. "*" displays a detailed view of all
uplink ports.
Example
->show uplinkport
Displays all uplink ports
->show uplinkport enc0:5:6
Displays details of uplink port 6 in bay 5 of the local enclosure
->show uplinkport *
Displays all uplink ports in the enclosure (detailed view)
->show uplinkport ID=enc0:1
Displays all the uplink ports for the specific bay (for example, for bay 1)
->show uplinkport status=Linked
Displays all the uplink ports that are linked
->show uplinkport ID=enc0:1 type=RJ45
Displays all the uplink ports for the specific bay 1 with connector type RJ-45
uplinkset
Manage shared uplink port sets
Supported actions: add, help, remove, set, show
Item Description
add uplinkset Create a new shared uplink port set.
Syntax add uplinkset <UplinkSetName>
[ConnectionMode=<Auto|Failover>]
Parameter
UplinkSetName
(required)
The unique name of the new shared uplink port set to create (required)
Property
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to
the uplinkset. Valid values include "Auto" and "Failover". The default value is
"Auto".
Examples
->add uplinkset MyNewUplinkSet
Creates a new shared uplink port set and adds it to the domain
->add uplinkset MyNewUplinkSet ConnectionMode=Failover
Creates a new shared uplinkset and sets the connection mode to failover
Item Description
remove uplinkset Remove a shared uplink port set from the domain.
Syntax remove uplinkset <UplinkSetName> | *>
Parameter