HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 43)

Command line 43
Item Description
MaxSpeedType
(Optional)
Maximum connection speed for any Ethernet connection attached to this network.
Valid values include "Unrestricted" and "Custom". "Custom" allows the user to
configure the preferred speed. The default value is "Unrestricted".
MaxSpeed
(required if
MaxpeedType is
"Custom)
The maximum connection speed for any Ethernet connection attached to this
network. Valid values range from 100Mb-10Gb in 100Mb increments.
Examples
->set network MyNetwork State=Disabled
Disables an existing network named "MyNetwork"
->set network Blue Name=Red
Changes the name of an existing network from "Blue" to "Red"
->set network GreenNetwork SmartLink=Enabled
Enables the SmartLink feature on a specific network
->set network network1 NativeVLAN=Disabled
Disables the network native VLAN tagging
->set network network1 Private=Disabled
Disables the private network property
->set network Network1 Private=Enabled
Enables a private network
->set network Network1 VlanId=150
Changes the VLAN ID of a network associated with a shared uplink set
->set network Network1 VLanTunnel=Enabled
Enables VLAN tunneling on the network
->set network Network1 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=6000
Modifies network to preferred connection speed of 4Gb and maximum connection
speed of 6Gb
Item Description
show network Display all Ethernet networks in the domain.
Syntax show network [<NetworkName> | *]
Parameter
NetworkName
(optional)
Name of an existing network in the VC domain. "*" displays a detailed view of all
the networks. If not specified, a summary view of the networks is displayed.
Examples
->show network
Displays a summary listing of all networks
->show network *
Displays detailed information for all networks
->show network MyNetwork
Displays detailed information for a specific network