HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 66)

Command line 66
Item Description
add user Create a new user and add it to the Virtual Connect Manager database.
Syntax add user <UserName> Password=<password> [FullName=<Full
Name>] [ContactInfo=<Contact Details>]
[Enabled=<True|False>]
[Privileges=<Storage|Network|Server|Domain|*>]
Parameter
UserName (required) The name of the new user to add. The username must be unique within the
domain.
Properties
Password (required) The password of the new user. The password of the new user can be entered as
clear text in the command or as a masked string at the prompt.
FullName (optional) The full name of the user (optional)
ContactInfo
(optional)
Contact information for the user (optional)
Enabled (optional) Enables or disables the user. Valid values include: "true" and "false". If not
specified, then the new user is enabled by default.
Privileges
(optional)
The allowed privileges for the user. The privileges may be any combination of
"domain", "server", "network", or "storage" separated by commas. If no
privilege is specified, then the user will have no privileges and will only be able
to display domain information. If "*" is specified, then all privileges apply.
Examples
->add user steve Password=fgY87hHl
Adds a new user by specifying the minimal amount of properties
->add user bill Password=HGtwf7272562
Privileges="domain,network" FullName="Bill Johnson"
[email protected] Enabled=true
Adds a new user and configures additional user properties
->add user Admin Password=hjkhfd Privileges=*
Adds an "Admin" user with all privileges
Item Description
remove user Remove a user from the Virtual Connect Manager database.
Syntax remove user <username | *>
Parameter
UserName (required) The name of an existing user that will be removed. If "*" is specified, then all
users except for the default Administrator account are removed.
Examples
->remove user steve
Removes a specific user by name
->remove user *
Removes all users
Item Description
set user Modify attributes of an existing user.