HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 47)

Command line 47
Item Description
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121 UUID=15713c60-fcf2-11dc-
a656-0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile
Assign a server profile to a device bay.
Syntax assign profile <ProfileName> <DeviceBay>
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay
(required)
The device bay to assign the profile to, in the format:
EnclosureID:DeviceBayNumber
If EnclosureID is not specified, it defaults to the local enclosure.
Example
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
Item Description
remove profile
Remove one or more server profiles from the domain.
Syntax remove profile <ProfileName | *>
Parameter
ProfileName
(required)
Name of an existing profile in the VC domain. "*" removes all the existing
profiles
Examples
->remove profile MyProfile
Removes a server profile by name
->remove profile *
Removes all server profiles
Item Description
set profile
Modify properties of an existing server profile.
Syntax set profile <ProfileName> [Name=<NewName>]
[EFIState=absent]
Parameter
ProfileName
(required)
The current name of the profile to modify
Properties