HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem User Manual

Page 38

Advertising
background image

Command line 38

Item Description

Example

->add log-target Destination=192.168.2.1 Port=600

Format=ISO8601 State=Enabled
Adds log-target 192.168.2.1

Item Description

remove log-target

Remove an existing remote logging destination.

Syntax

remove log-target <ID>

Property

ID (required)

The index of the remote log destination to be deleted

Example

->remove log-target 3
Removes log-target index number 3

Item Description

set log-target

Modify the properties of an existing remote log destination.

Syntax

set log-target <ID> [Destination=<IpAddress|DNS>]

[Severity=<Critical|Error|Warning|Info>]

[Transport=<TCP|UDP>] [Port=<1-65535>]

[Security=<None|STunnel>] [Format=<RFC3164|ISO8601>]

[State=<Enabled|Disabled>]

Parameter

ID (required)

The index of the remote log destination whose configuration needs to be
modified

Properties

Destination

(optional)

The IpAddress or the DNS of the remote log destination that has been
configured

Severity (optional)

Severity of the log messages that should be sent to the specified destination.

Valid values include "Critical", "Error", "Warning", and "Info". The default
value is "Info".

Transport (optional) The transport protocol to be used for sending the log messages to the

destination. Valid values include "TCP" and "UDP". The default value is "UDP".

Port (optional)

Secure transmission of the log messages. Valid values include "None" and

"STunnel". The Default value is "None", and no encryption is used during
transmission.
The "STunnel" option can be used only if the transport protocol used is TCP.

Format (optional)

The timestamp format for the log messages. Valid values include "RFC3164"

(Nov 26 13:15:55) and "ISO8601" (1997-07-16T19:20:30+01:00). The
default value is "RFC3164".

State (optional)

Enables or disables the remote log destination. Valid values include "Enabled"
and "Disabled". The default value is "Disabled".

Examples

->set log-target 1 Severity=Error Transport=TCP

Security=STunnel
Modifies log-target index number 1

Advertising