HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 54)

Command line 54
Item Description
->remove server-port-map MyProfile:1 *
Removes all server port network mappings from a profile
->remove server-port-map *
Removes all the server port mappings in the domain
Item Description
set server-port-
map
Modify an existing server port network mapping. This command cannot be used if
the domain setting VLanTagControl is set to "Tunnel" or if the network is associated
with a shared uplink port set.
Syntax set server-port-map <ConnectionID> [Network=<Network Name>]
[VLanID=<VLanID>] [UnTagged=<true|false>]
Parameters
ConnectionID
(required)
The reference ID of an existing enet-connection associated with a profile and a
server port. The format of the ConnectionId is <ProfileName:PortNumber>.
Network
(required)
The name of a valid Ethernet network to which the mapping exists
Properties
VLanID (optional) The new VLAN ID to be used for the mapping server port to network. Valid values
include 1 to 4094.
Untagged
(optional)
Enables or disables the network to handle untagged packets. Only one network in
an Ethernet network connection is allowed to handle untagged packets. The default
value is "false". If a shared uplink set is being used, then untagged network is the
same as the native network if present, but any network can also be configured to
handle untagged packets.
When changing a network untagged option from true to false, the user is required to
provide a VLanID if the global option SharedServerVLanId is set to "false".
Examples
->set server-port-map MyProfile:1 Network1 VLanId=100
Modifies the VLAN ID of an existing server port network mapping
->set server-port-map MyProfile:1 Network1 Untagged=true
Modifies the existing server port network mapping to handle untagged packets
Item Description
show server-port-
map
Display a server port network mapping. This command cannot be used if the domain
setting, VLanTagControl, is set to "Tunnel".
Syntax show server-port-map [<ConnectionID> | *]
Parameter
ConnectionID The reference ID of an existing enet-connection associated with a profile and a
server port. The format of the ConnectionId is <ProfileName:PortNumber>.
Examples
->show server-port-map
Lists all the server port mappings
->show server-port-map MyProfile:1
Displays the server port mapping for a profile