HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 46)

Command line 46
Item Description
Example
->show port-monitor
Displays the port monitor configuration
profile
Manage server profiles.
Supported actions: add, assign, help, remove, set, show, unassign
Item Description
add profile
Create a new server profile. After the profile has been created, the profile can
then be configured using the "set" subcommand and additional network and
fabric connections can also be added. The server profile can also be assigned to
a device bay using the "assign" subcommand.
Syntax add profile <ProfileName> [-NoDefaultEnetConn] [-
NoDefaultFcConn] [SNType=<Factory-Default|User-
Defined>] [SerialNumber=<serialnumber>]
[UUID=<uuid>]
Parameter
ProfileName The unique name of the new server profile to create
Options
NoDefaultEnetConn Do not add default Ethernet Network connections when creating the server
profile.
NoDefaultFcConn Do not add default FC SAN connections when creating the server profile.
Properties
SNType (Optional) The source of the serial number assignment to be used during the profile
creation. If not specified, the serial number is assigned as per the Virtual connect
default domain settings. Valid values include "Factory-Default" and "User-
Defined".
SerialNumber
(required if the
SNType is User-
Defined)
A custom user-defined serial number associated with the server profile. When the
profile is assigned to a device bay that contains a server, the server inherits the
virtual serial number. The user-defined serial number must start with the pattern
VCX01.
UUID (Optional) A unique 128-bit identifier for the virtual server ID The format of the xxxxxxxx-
xxxx-xxxx-xxxx-xxxxxxxxxxxx where x is any alpha-numeric character. If no UUID
is specified, then one is auto-generated. The UUID can be specified only if the
SNType is User-Defined.
Examples
->add profile MyNewProfile
Creates a new profile and adds it to the domain, using default connections
->add profile MyNewProfile2 -NoDefaultEnetConn
Creates a new profile without adding default Ethernet connections
->add profile MyNewProfile2 -NoDefaultFcConn
Creates a new profile without adding default FC connections