Log-target – HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem User Manual
Page 37
Command line 37
Item Description
Privileges (optional) A set of one or more privileges for the group. Valid values include any
combination of "domain", "server", "network", and "storage".
Example
->set ldap-group MyGroup Description="Test Group"
Privileges=domain,server,network
Modifies a directory group description and privileges
Item Description
show ldap-group
Display the existing directory groups.
Syntax
show ldap-group
Example
->show ldap-group
Displays LDAP group information
log-target
Manage remote log destination settings.
Supported actions: add, help, remove, set, show, test
Item Description
add log-target
Add a new remote log destination.
Syntax
add log-target <Destination=IpAddress|DNS>
[Severity=<Critical|Error|Warning|Info>]
[Transport=<TCP|UDP>] [Port=<1-65535>]
[Security=<None|STunnel>] [Format=<RFC3164|ISO8601>]
[State=<Enabled|Disabled>]
Properties
Destination
(required)
The IpAddress or the DNS of the configured remote log destination
Severity (optional)
Severity of the log messages that should be sent to the specified destination.
Valid values include "Critical", "Error", "Warning", and "Info". The default
value is "Info".
Transport (optional) The transport protocol to be used for sending the log messages to the
destination. Valid values include "TCP" and "UDP". The default value is "UDP".
Port (optional)
The port to be used on the destination to send the log messages. Valid values
include 1 to 65536. The default value is 514.
Security (optional)
Secure transmission of the log messages. Valid values include "None" and
"STunnel". The default value is "None", and no encryption is used during
transmission.
The "STunnel" option can be used only if the transport protocol used is TCP.
Format (optional)
The timestamp format for the log messages. Valid values include "RFC3164"
(Nov 26 13:15:55) and "ISO8601" (1997-07-16T19:20:30+01:00). The
default value is "RFC3164".
State (optional)
Enables or disables the remote log destination. Valid values include "Enabled"
and "Disabled". The default value is "Disabled".