HP NonStop G-Series - Manual (Page 212)

EMS Support
HP NonStop Storage Management Foundation User's Guide—523562-008
A-62
SMF Events
Recovery. Examine the event log for a related file system error, and proceed
according to the type of error you find. Refer to the Guardian Procedure Errors and
Messages Manual for information about the file system error.
5026: ZSMF-EVT-STATESTARTERR
execution-state
is a process execution state code associated with token ZSMF-TKN-INT16-LINK1.
Values are 12 (Up) or 14 (Up Special).
conditional-info
is returned if a file system or shared services error occurs. See Conditional
Information on page A-23. Shared services notifications are described in Table A-8
on page A-16.
Cause. A storage pool or virtual disk process or $ZSMS could not be initialized when
attempting to transition from the Special to the Up state or from the Down state to the
Up Special state. This error may be the result of a failure to obtain a lock or the lack of
sufficient internal resources.
Effect. The process state does not change.
Recovery. Contact your service provider.
5027: ZSMF-EVT-DEFAULTCASEERR
function-name
is the name of an SMF function associated with token
ZSMF-TKN-FUNCTIONNAME-LINK1.
switch-code
is a number identifying where in SMF the error was experienced associated with
token ZSMF-TKN-INT16-LINK1.
conditional-info
is returned if a file system or shared services error occurs. See Conditional
Information on page A-23. Shared services notifications are described in Table A-8
on page A-16.
Cause. An internal function experienced a case error. SMF was not able to handle this
situation.
Unable to enter the execution-state state. [conditional-info]
Function function-name encountered default case with switch
value switch-code. [conditional-info]