HP NonStop G-Series - Manual (Page 69)

Configuring and Managing SMF Processes
HP NonStop Storage Management Foundation User's Guide—523562-008
3-19
Configuration Example
5. Add and start virtual disks within the pool by using COUP:
COUP
ASSUME PROCESS
SET PROGRAM $SYSTEM.SYSnn.OVDP
SET STARTUPMSG (BC 1)
SET CPU 2
SET TYPE 3
SET SUBTYPE 36
ADD $VDP1
START $VDP1
ASSUME PROCESS
SET PROGRAM $SYSTEM.SYSnn.OVDP
SET STARTUPMSG (BC 1)
SET CPU 2
SET TYPE 3
SET SUBTYPE 36
ADD $VDP2
START $VDP2
EXIT
For G-series systems, use SCF commands as follows:
SCF
ASSUME SENDTO STORAGE
ADD MON $ZSMS, PRIMARYCPU 2, BACKUPCPU 1, CATALOGLOCATION
$AUDIT
START $ZSMS
ADD POOL $POOL, PRIMARYCPU 2, BACKUPCPU 1, CATALOGLOCATION
$AUDIT
START $POOL
ALTER $AUDIT , POOL $POOL
ALTER $OTHER , POOL $POOL
ADD DISK $VDP1, TYPE VIRTUAL, PRIMARYCPU 2, BACKUPCPU 1,
PENDOPSLOCATION $AUDIT, ANTLOCATION $AUDIT, POOL $POOL
START $VDP1
ADD DISK $VDP2, TYPE VIRTUAL, PRIMARYCPU 2, BACKUPCPU 1,
PENDOPSLOCATION $AUDIT, ANTLOCATION $AUDIT, POOL $POOL
START $VDP2
1. Perform as many ADD POOL commands and ADD DISK commands as you have
pools and virtual disks to add.