HP NonStop G-Series - Manual (Page 262)

EMS Support
HP NonStop Storage Management Foundation User's Guide—523562-008
A-112
SMF Events
5303: ZSMF-EVT-CATALOGANTMAPPING
catalog-location
is a physical catalog location stored in the ANT catalog file associated with token
ZSMF-TKN-FILENAME-LINK2.
catalog-name
is a catalog file name associated with token ZSMF-TKN-FILENAME-LINK1.
conditional-info
is returned if a file system or shared services error occurs. See Conditional
Information on page A-23. Shared services notifications are described in Table A-8
on page A-16.
Cause. A request contained an invalid catalog location, most likely a location not on
the local system.
Effect. The request is processed by using the default subvolume name.
Recovery. Informational message only; no corrective action is needed.
5304: ZSMF-EVT-UPDATECATALOGLABEL
catalog-name
is a catalog file name associated with token ZSMF-TKN-FILENAME-LINK1.
error-number
is a disk process error number associated with token ZSMF-TKN-INT16-LINK2.
conditional-info
is returned if a file system or shared services error occurs. See Conditional
Information on page A-23. Shared services notifications are described in Table A-8
on page A-16.
Cause. A virtual disk process could not create a catalog file entry because it received
an error from DP2.
The physical catalog location specified in the definition
does not match the physical file name currently in the VDP
ANT. The ANT is using catalog-location as the physical file
for catalog catalog-name. [conditional-info]
The VDP could not update the label for catalog file catalog-
name with the logical filename. Error error-number returned
by the disk process. [conditional-info]