HP Array Controller HSG V8.7 Software - Manual (Page 117)

Single-Ended I/O Module
UltraSCSI RAID Enclosure 5–15
Turning On the Subsystem
Complete the procedures in Table 5–7 to turn O N the subsystem.
Table 5–7 Turning On the UltraSCSI Subsystem
1. If there are no expansion enclosures, go to step 3.
2. Turn O N all the ac input
boxes for each expansion
enclosure by pressing I on
each ac power switch
(C
ALLOUT 1).
3. On the master enclosure,
turn O
N all the ac input
boxes by pressing I on each
ac power switch
(C
ALLOUT 1).
4. Verify that the array controller places the subsystem into an
operational state.
1
0
CXO5488B
2
1