HP Officejet 350 All-in-One Printer - Manual (Page 63)

2`8
Sending Paper Faxes
to Multiple Fax Numbers
The following procedure lets you manually send a paper fax to
several numbers you have not already grouped. If your document
does not fit into memory, you will need to send the document to each
fax number, one at a time.
Do this:
Using
these buttons:
For this display:
1. Dial a fax number OR press
Speed Dial and a two-digit
code number. (The example
shows "5552312.")
0 through 9 Press START to send
5552312
2. Press Enter/Save (not Start/
Copy ).
Enter/Save
Enter another?
1=Yes 2=No
3. Press 1 to enter another fax
number.
1
Enter fax number
2:
4. Repeat steps 1 and 2 until
you've entered all your fax
numbers (up to 10 fax num`
bers can be entered). Then
press 2 to quit adding fax
numbers.
2 Load document
then press START
5. Load your document. The
bottom line of the display
will tell you how many fax
numbers will be dialed ("3"
in the example).
Loading document
Group size: 3
Press START to send
Group size: 3
6. Press Start/Copy . First the
document is scanned into
memory, then the fax num`
bers are dialed, one at a time,
in the same sequence in
which you entered them.
Start/Copy
Storing . . .
Memory used: 40%