HP ProLiant BL20p G3 Server Blade - Manual (Page 14)

Server Blade Component Identification
Table 1-1: ProLiant BL20p G3 Server Blade Front Panel LEDs continued
Item LED Description Status
3 NIC 1*
4 NIC 2*
5 NIC 3*
6 NIC 4*
Green = Linked to network
Green flashing = Network activity
Off = No activity
7 Power Green = On
Amber = Standby (power available)
Off = Unit off
*Actual NIC numeration depends on factors such as which operating system
is installed on the server.
Hot-Plug SCSI Hard Drive
Each hot-plug SCSI hard drive has three LEDs located on the front of the drive. The
LEDs provide activity, online, and fault status for each corresponding drive when
configured as a part of an array and attached to a powered-on Smart Array controller.
Their behavior may vary depending on the status of other drives in the array. Use
Figure 1-2 and Table 1-2 to identify LED locations and functions.
HP ProLiant BL20p Generation 3 Server Blade User Guide 1-3