HP ProLiant BL20p G3 Server Blade - Manual (Page 29)

Server Blade Setup
HP ProLiant BL20p Generation 3 Server Blade User Guide 3-5
Removing a Server Blade from a Server Blade
Enclosure
1. Press the release button (1).
CAUTION: After you press the release button, the server blade is unlocked from
the server blade enclosure. Use both hands to support the server blade when
you remove it from the rack.
2. Open the release lever (2).
3. Grasp the lever and slide the server blade from the server blade enclosure (3).
Place a hand under the server blade to support it as you remove it from the server
blade enclosure.
Figure 3-4: Removing a server blade