HP ProLiant BL20p G3 Server Blade - Manual (Page 36)

Hardware Options Installation
CAUTION: If you are replacing a drive that is part of an array, refer to the
HP ProLiant Servers Troubleshooting Guide.
Figure 4-7: Removing a hot-plug SCSI hard drive
Installing Hot-Plug SCSI Hard Drives
1. Remove the existing hard drive blank or SCSI hard drive from the bay. Refer to
“Removing Hard Drive Blanks” or “Removing Hot-Plug SCSI Hard Drives” in
this chapter.
HP ProLiant BL20p Generation 3 Server Blade User Guide 4-7