Chapter 6: connecting local i/o devices, Connecting to a server blade through ilo, Chapter 6 – HP ProLiant BL20p G3 Server Blade User Manual
Page 79: Connecting local i/o devices, Connecting to a server blade through ilo -1
6
Connecting Local I/O Devices
Use the local I/O cable to perform some server blade configuration and diagnostic
procedures.
Connecting to a Server Blade through iLO
To connect to iLO using the local I/O cable, you must have the following:
•
A client PC with a 10/100 Ethernet RJ-45 connector
•
A network cable with RJ-45 connectors
To connect directly to iLO:
IMPORTANT: Do not connect the local I/O cable to a hub. All server blades have the same IP
address through the I/O port. Multiples on a hub make the server blades indistinguishable on
the network. Refer to “Integrated Lights-Out Advanced Management” in Chapter 5, “Server
Blade Configuration and Utilities” for the default server blade IP address.
HP ProLiant BL20p Generation 3 Server Blade User Guide
6-1