HP ProLiant BL20p G3 Server Blade - Manual (Page 28)

Server Blade Setup
CAUTION: Always populate the server blade enclosure bays with either a server
blade or server blade blank. Unpopulated bays can lead to improper cooling and
thermal damage.
1. Align the keyed end of the server blade with the guide at the end of a bay on the
server blade enclosure.
IMPORTANT: The server blade is keyed to fit only one way in the bay. If the server blade
does not slide easily into the bay, be sure that the server blade is oriented properly.
2. Install the server blade by sliding the server blade fully into the bay (1).
3. Close the ejector lever (2).
Figure 3-3: Installing a server blade
3-4 HP ProLiant BL20p Generation 3 Server Blade User Guide