HP ProLiant BL20p G3 Server Blade - Manual (Page 81)

Connecting Local I/O Devices
3. Connect the local I/O cable to the I/O port on the server blade.
CAUTION: Disconnect the local I/O cable from the port when not in use. The port
and connector do not provide a permanent connection. Rear iLO connector
performance degrades when the local I/O cable is in use, even when the iLO
connector on the cable is not in use.
Figure 6-2: Connecting the local I/O cable to a server
blade
CAUTION: On the local I/O cable, the locking buttons are located on the sides of the
server blade connector.
Always be sure to squeeze the locking buttons on the server blade connector before
disconnecting the local I/O cable from the I/O port. Failure to do so can result in
damage to the equipment.
HP ProLiant BL20p Generation 3 Server Blade User Guide 6-3