HP ProLiant BL20p G3 Server Blade - Manual (Page 30)

4
Hardware Options Installation
Processors and Heatsinks
The ProLiant BL20p G3 server blade ships with one or two processors.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
WARNING: This documentation assumes that the server blade is in a rack and
not receiving power from a diagnostic station. If using a diagnostic station, be
sure to disconnect the server blade from the diagnostic station before
installing a processor.
CAUTION: Properly ground yourself before beginning any installation procedure.
Electrostatic discharge can damage electronic components.
CAUTION: Handle the processor with care. Do not bend or damage the pins
beneath the processor.
HP ProLiant BL20p Generation 3 Server Blade User Guide 4-1