HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 115)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 115
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
WA
N
A
CC
EL
ERA
T
O
R
4. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Modifying Ports
in a Port Label You can add or delete ports associated with a port label in the Port Label: <Port Label
Name> page.
To modify ports in a
port label 1. Click the Setup tab to display the Setup menu.
2. Click Port Labels to display the Port Labels page.
3. Click the port label name in the Port Labels list to display the Port Label - <Port
Label Name> page.
Figure 2-46. Port Label: <Port Label Name> Page
4. Under Ports, add or delete ports in the Ports text box.
5. Click Update Ports to save your settings. Click Cancel to cancel your changes.
6. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting Report Parameters
This section describes how to set parameters to generate alarm and error reports. It
includes the following sections:
‹ “Setting Alarm Parameters,” next
‹ “Setting Email Notification” on page 117
‹ “Setting SNMP Parameters” on page 119
‹ “Setting SNMP Trap Receivers” on page 120
‹ “Setting Monitored Ports” on page 121