HP XP7 Storage - Manual (Page 144)

Local Storage System
Description Item
Local model. Model
Local serial number. Serial Number
Cnt Ac-S Z only. Local CU
Local system CU number. Displays when Connection Type is CU.
Remote Storage System
Description Item
Remote system’s model. Model
Last five or six digits of the remote system serial number, as follows: Serial Number
• XP7: 1 to 99999 (5 digits)
•
P9500 or XP24000/XP20000 Disk Array: 1 to 99999 (5 digits)
Note: When using RAID Manager (including Raidcom), the XP7 serial number
requires a prefix of "3".
Cnt Ac-S Z only. Remote CU
Remote system CU number. Displays when Connection Type is CU.
Cnt Ac-S Z only. SSID
Remote system SSID.
Cnt Ac-S Z only. Add SSIDs
Clicking adds the SSID to the remote system. The maximum is four.
Remote Paths
Description Item
Cnt Ac-S/Cnt Ac-J/Cnt Ac-J Z only. Path Group ID
Path group identifier. Displays when Connection Type is System.
Minimum number of remote paths. Minimum Number of Paths
•
Cnt Ac-S and Cnt Ac-S Z: Range is from 1 to 8.
• Cnt Ac-J and Cnt Ac-J Z: The minimum number is 1, regardless of the number
entered.
Port lists •
Left side: local port identifier
• Right side: remote port identifier
Clicking opens a dialog box for creating additional paths (maximum of eight). Add Paths
Options
Description Item
Time limit between 10 and 100 seconds for the data-transfer operation to
complete (15 is the default). RIO MIH Time
Cnt Ac-S/Cnt Ac-S Z only. Roundtrip Time (msec.)
144 Cnt Ac-S Z GUI reference