HP XP7 Storage - Manual (Page 171)

Description Item
• Pair Position: Whether volume is a P-VOL or S-VOL.
•
Emulation Type: Volume’s emulation type.
• Capacity: Volume’s capacity.
•
CLPR: Volume’s CLPR.
Type of pair: Copy Type
• Cnt Ac-S: Continuous Access Synchronous
•
Cnt Ac-S Z: Continuous Access Synchronous Z
Pair status. Status
Cnt Ac-S only. Secondary Volume Write
Whether the S-VOL can be written to while the pair is split.
• Enable: Can write to S-VOL.
•
Disable: Prevents writing to S-VOL. Default.
A hyphen displays if performing the split operation from the pair’s secondary
storage system, regardless of the selected option.
Whether the P-VOL can be written to while the pair is split. Primary Volume Write
• Depend on Primary Volume Fence Level: Writing to P-VOL depends on the
Primary Volume Fence Level Setting. Default.
•
Disable: Prevents writing to the P-VOL.
A hyphen displays if performing the split operation from the pair’s secondary
storage system, regardless of the selected option.
P-VOL’s fence level setting. Fence Level
Cnt Ac-S Z only. SSB Transfer (F/M=FB)
Whether to report SSB (sense byte) to the host. Enable/Disable.
A hyphen displays if performing the split operation from the pair’s secondary
storage system, regardless of the selected option.
Information about the remote system. Remote Storage System
• Model / Serial Number: Model and serial number.
•
SSID: SSID number. Cnt Ac-S Z only.
• LDEV ID: LDEV identifier.
Cnt Ac-S only. Path Group ID
Path group identifier.
Pair’s consistency group identifier. CTG ID
Whether the consistency group is shared by multiple storage systems. CTG Utilization
•
Single: The consistency group consists of a single pair of primary and
secondary storage systems.
• Multi: The consistency group consists of multiple storage systems.
Cnt Ac-S Z only. Preserve Mirror Status
Preserve mirror status.
Resync Pairs wizard
Use this wizard to resynchronize pairs.
Resync Pairs wizard 171